TECHNICAL

INSPECTION

Independent. Accredited. Multi-Industry. Your Trusted Global Verification Partner.

Engineering-Level Inspection for Complex, High-Value Products

Technical Inspection requires deep engineering experience. 
Kaian Aldiqa provides industry experts and certified inspectors to evaluate complex equipment,
technical assemblies, and critical components across multiple sectors.

Technical Inspection for the Oil & Gas Sector

Ensuring Engineering Integrity for High-Risk, High-Value Operations

The oil & gas industry demands absolute precision, compliance, and reliability. Every component — from a single bolt to a complete skid — plays a role in operational safety and production continuity.
Kaian Aldiqa provides deep technical inspection expertise across the full manufacturing lifecycle, ensuring that every piece of equipment delivered to the client is fully compliant with engineering specifications, industry standards, and operational requirements.
Our technical inspectors and engineers operate globally to safeguard your investment, prevent quality failures, and eliminate risks before installation or commissioning

Full-Scope Technical Inspection Coverage

API 5L Pipe Inspection (LSAW, SSAW, ERW):
Ensuring line pipes meet mechanical, dimensional, and metallurgical requirements.  Inspection includes:

• Steel plate/coil verification
• Visual inspection at forming, welding, and expansion stages
• Dimensional checks (OD, WT, straightness, ovality)
• Bevel angle and end preparation inspection
• NDT witnessing (UT, RT, MT, PT)
• Hydrostatic testing supervision
• Coating and external protection quality checks (FBE/3LPE/3LPP)
• MTC review and traceability validation
• Marking, stenciling, and documentation compliance

Valve, Flange & Fitting Inspection

Ensuring integrity, leakage tightness, and dimensional accuracy of all critical components.
Scope includes:

• API 6A / 6D / 600 / 598 compliance
• Hydrostatic and pneumatic pressure tests
• Functional testing of actuated and manual valves
• Hardness and PMI testing (as required)
• Surface finish and internal bore inspection
• Dimensional checks vs. GA drawings & standards
• Torque testing and movement verification
• Flange face finish and serration checks
• Non-destructive examination (as required per ITP)

Mechanical Equipment Inspection (Rotating & Static)

Ensuring high-performance mechanical systems meet design and safety requirements.

Inspection may include:

• Assembly verification
• Shaft alignment check
• Vibration and noise testing
• Static vs dynamic test witnessing
• Dimensional verification across sub-assemblies
• Material and weld verification
• Protective coating checks
• FAT oversight (performance testing, NPSH, flow rate, leakage, vibration, temperature)

Scope includes:

• Pumps (centrifugal, positive displacement, dosing)
• Compressors and blowers
• Gearboxes and transmission systems
• Skids and packaged equipment
• Tanks and vessels
• Heat exchangers and boilers

Pressure Vessel & Welding Inspection

Critical safety equipment requires high-accuracy inspection to avoid catastrophic failures.
Scope includes:

• Review of WPS/PQR/WPQ
• API/ASME Sec. VIII compliance check
• Plate material verification
• Weld visual inspection (VT)
• Witnessing NDT (RT, UT, MT, PT)
• PWHT verification
• Internal/external inspection of surfaces
• Nozzle orientation and dimensional checks
• Hydrostatic test witnessing
• Nameplate and stamping verification

Electrical & Instrumentation Verification

Ensuring safe and compliant installations for hazardous and non-hazardous areas.

Scope includes:

• Electrical panels, MCCs, and switchgear inspection
• Cable sizing, insulation resistance & continuity tests
• Junction box verification
• Loop checks and continuity testing
• Calibration of sensors, gauges, transmitters
• Instrument functional testing
• Compliance with IEC standards

This ensures full reliability and safety of electrical and control systems.

ATEX, IECEx & Hazardous Area Compliance

Inspection for equipment intended for explosive atmospheres.

FAT Scope includes:

• Mechanical & electrical function testing
• PLC, control logic, and software verification
• Start-up and shutdown simulations
• Interlock and emergency system testing
• Visual inspection before packing
• Data logging and performance validation
• Signing FAT reports and certification

Witnessing FAT reduces risk, prevents costly site failures, and increases operational confidence.

Documentation, Drawings & Certification Review

Technical compliance starts with correct documentation — we verify:

• GA drawings, P&ID, datasheets
• ITP compliance & inspection stages
• MTC certificates and traceability
• Calibration certificates
• Welding documentation (WPS, PQR, WPQ)
• FAT and SAT documentation
• Coating certificates & thickness records
• Vendor Data Books (VDB)
• Packing lists & shipping documents
• Compliance with API, ASME, ASTM, ISO, EN, NACE

A complete documentation package ensures regulatory and contractual compliance.

Packing, Preservation & Shipment Readiness Inspection

Ensuring equipment is protected and ready for harsh shipping and storage conditions.

Scope includes:

• Export packing verification
• Humidity indicators and desiccants
• Crate strength & sealing
• Shock & tilt protection
• Spare parts and loose items verification
• Marking and labeling (PO, batch, item number)

Proper packing prevents transport damage — a major risk for oil & gas equipment.

Final Release, NCR Management & Vendor Follow-Up

We ensure all deviations are resolved before shipment.

Includes:

• NCR issuance
• Corrective action follow-up
• Re-inspection
• Punch-list closure
• Final Inspection Release Note (IRN) issuance

This ensures the client receives a fully compliant, risk-free product.

Our Philosophy

Improves customer satisfaction

Reduces defect rate

Ensures compliance with regulatory bodies

Builds supplier accountability

Prevents costly returns or recalls

Scope of Technical Inspection for Food & Agriculture Equipment

Filling, Dosing & Dispensing Systems

Ensuring accurate dosing, hygiene, and mechanical performance.

• Liquid and semi-liquid filling machines
• Powder and grain dosing equipment
• Multi-head filling systems
• Bottle/jar filling lines
• Oil, juice, water, and sauce filling equipment

Inspection includes:

• Accuracy of filling volumes
• Material compatibility (food-grade stainless steel: 304/316)
• Hygiene and CIP/SIP system checks
• Leak prevention and sealing quality
• Performance testing at various speeds

Packaging & Sealing Machinery

Protecting product integrity through robust packaging systems.

• Horizontal & vertical packaging machines
• Vacuum sealers
• Shrink-wrapping units
• Sachet and pouch packaging machines
• Bottle capping systems

Inspection includes:

• Sealing strength verification
• Thermal sealing calibration
• Packaging material compatibility
• Safety guards and emergency systems
• Label alignment and printing accuracy

Storage Silos & Temperature-Controlled Systems

Ensuring proper preservation, safety, and environmental control.

• Grain silos
• Liquid storage tanks
• Cold rooms, chillers & freezers
• Controlled atmosphere storage systems
• Insulated containers

Inspection includes:

• Temperature mapping & calibration
• Structural integrity and sanitation
• Moisture control & ventilation
• Internal lining quality
• Protection against contamination & pests

Conveyor Systems & Production Lines

Ensuring seamless, hygienic, and efficient production flow.

• Belt conveyors
• Screw conveyors
• Modular conveyors
• Sorting and grading lines
• Washing, drying, and blanching lines

Inspection includes:

• Belt integrity and alignment
• Sanitation and cleanability (smooth surfaces, no dead zones)
• Motor function & load-bearing capacity
• Safety guards and operator controls

Weighing, Sealing, Sorting & Measurement Machinery

Critical systems for accuracy, classification, and quality consistency

• Checkweighers
• Dynamic scales
• Metal detectors
• X-ray inspection systems
• Optical sorters
• Carton sealing machines

Inspection includes:

• Calibration accuracy
• Response sensitivity (foreign object detection)
• Sorting precision
• Mechanical function & wear analysis

Food Safety Compliance & Material Verification

In addition to mechanical and electrical inspection, Kaian Aldiqa verifies compliance with:

• HACCP
• ISO 22000
• BRC Global Food Standard
• Codex Alimentarius
• Local regulatory requirements

This includes checking:

• Food-contact surfaces
• Stainless steel grades (304/316)
• Gasket materials, seals & lubricants
• CIP (clean-in-place) systems
• Hygiene zones & contamination controls

We ensure equipment is manufactured and installed in a way that prevents contamination, ensures hygiene, and supports food safety certification.

Documentation & Certification Review

We review all technical and compliance documents, including:

• Equipment manuals & datasheets
• Calibration certificates
• Material certificates (MOC verification)
• Food safety compliance certificates
• Maintenance logs & FAT reports
• Electrical diagrams and safety documentation

Documentation is essential for audits, licensing, and regulatory approval.

FAT (Factory Acceptance Test) for Food Equipment

We witness and validate:

• Performance testing
• Production capacity & throughput
• Hygiene and cleaning cycles
• Temperature control systems
• Packaging accuracy
• Operational safety systems
• Load tests & simulation runs

This ensures equipment is production-ready and compliant before shipment.

Our Promise

Kaian Aldiqa ensures that every food processing, manufacturing, and packaging system is:

Technically sound

Hygienic & food-safe

Properly calibrated

Energy-efficient

Compliant with international standards

Capable of meeting production demands

Your food equipment must be safe, compliant, and reliable — and we make sure of it.

Technical Inspection for the Medical & Healthcare Sector

Technical Validation of Medical Equipment, Ambulance Systems & Life-Saving Healthcare Devices

Medical equipment demands zero margin for error.
Whether it is an ambulance unit, a diagnostic machine, or a critical-life-support system, the safety of patients and the performance of healthcare operations depend on absolute reliability.
Kaian Aldiqa provides specialized technical inspection services for medical equipment, hospital installations, mobile medical units, and healthcare devices.
We ensure every product meets the highest international standards for safety, functionality, accuracy, sterility, and regulatory compliance.
Our inspection scope covers the entire chain — from fabrication and assembly to performance testing and documentation review.

Ambulance Fabrication & Medical Fit-Out Inspection

Ambulances require perfect integration between the vehicle body and medical systems.
We inspect all stages of manufacturing and outfitting to ensure readiness for emergency medical use.

Inspection Includes:

• Verification of vehicle body fabrication workmanship
• Assessment of interior design, ergonomics & medical layout
• Inspection of cabinets, stretchers, rails & mounting systems
• Electrical system integration & safety checks
• HVAC and climate control performance
• Medical equipment installation & fixed mounting verification
• Testing emergency lighting, sirens & control panel systems
• Verification of cleanability and infection-control materials

We ensure the ambulance complies with international emergency vehicle standards and is safe,
functional, and ready for real-world use.

Functional Testing of Diagnostic & Clinical Machines

We verify that medical devices perform accurately and reliably under real operational conditions.

Critical systems for accuracy, classification, and quality consistency

• ECG machines
• Ultrasound and imaging systems
• Defibrillators
• Patient monitors
• Suction machines
• Infusion pumps
• Vital signs monitors
• Laboratory diagnostic instruments

Functional validation includes:

• Operating sequences & software readiness
• Accuracy and repeatability of measurements
• Response time & alarm behavior
• Stability during continuous operation
• Electrical load performance

Every device must deliver consistent, safe, and medically accurate results.

Electrical Safety Testing & Calibration Verification

Medical devices must meet stringent electrical safety requirements to protect patients and healthcare staff.
Inspection Includes:

• Grounding & insulation resistance tests
• Leakage current testing
• Continuity & polarity checks
• Fuse and circuit protection verification
• Calibration validity of sensors, probes & instruments
• Battery performance testing
• Review of calibration certificates (ISO 17025)

We ensure equipment complies with IEC 60601 and other relevant medical electrical safety standards.

Verification of Medical-Grade Materials & Construction

Materials used in medical environments must meet strict hygiene, sterility, and mechanical standards.
We verify:

• Stainless steel grades used in medical surfaces (304/316)
• Biocompatibility and non-toxic materials
• Resistance to cleaning agents and disinfectants
• Sterile packaging materials
• Quality of tubing, connectors, and seals
• Hygiene & smooth finish of interior surfaces (no contamination traps)

This ensures equipment is safe for patient contact and resistant to clinical cleaning procedures.

Oxygen Systems, Suction Units, Ventilators & Life-Support Systems

We perform in-depth inspection of critical life-support equipment:
Scope includes:

• Oxygen distribution & pressure regulation systems
• Suction power performance & vacuum stability
• Ventilator modes, alarms & functionality
• Nebulizer and inhalation system accuracy
• Tubing integrity and leak detection
• Pressure gauge calibration
• Backup battery functionality

These systems are inspected with high sensitivity since they directly support patient survival in emergency and clinical care.

Documentation, Certification & Compliance Review

We verify all technical and regulatory documents:

• CE marking & Declaration of Conformity
• FDA approval status (for US-market equipment)
• ISO 13485 compliance evidence
• Calibration certificates (ISO 17025)
• FAT/SAT documentation
• Maintenance manuals & operating instructions
• Serial numbers & traceability records

Proper documentation ensures the equipment is legally compliant and operationally safe for medical use.

FAT / SAT for Medical Devices

We witness both Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) to ensure equipment meets performance standards before and after installation.
FAT/SAT includes:

• Functionality checks
• Load and endurance testing
• Software operation & interface testing
• Auto-diagnostic and alarm verification
• Integration with related systems
• Power supply & battery backup tests

This guarantees readiness for real clinical deployment.

Our Compliance Framework

Kaian Aldiqa ensures full adherence to:

Technically sound

Hygienic & food-safe

Properly calibrated

Energy-efficient

Compliant with international standards

Capable of meeting production demands

Our goal is simple:
Ensuring every medical device and ambulance delivered to your organization is safe, compliant, and reliable.

Why Clients Trust Kaian Aldiqa for Medical Technical Inspection

• Specialized medical inspection engineers
• Experience with ambulances, devices & diagnostic equipment
• Transparent inspection reports with technical evidence
• Strong understanding of international medical regulations
• Rapid coordination with manufacturers and clients
• Multi-country inspection coverage

We reduce the risk of equipment failure, non-compliance, and patient safety incidents.

Your medical equipment must be safe, compliant, and fully operational
Kaian Aldiqa ensures it — every time

Technical Inspection for General Materials

Ensuring Safety, Reliability & Compliance Across Industrial, Electrical, and Commercial Products

Not all equipment falls under oil & gas, food, or medical sectors — but every product, regardless of category, must meet performance, safety, and quality requirements before it enters your supply chain.
Kaian Aldiqa provides comprehensive technical inspection services for a wide range of general industrial, electrical, mechanical, and commercial materials.  Our objective is to ensure that every item delivered to your operations is manufactured correctly, performs reliably, and complies with international and contractual standards.

This service is designed for importers, distributors, manufacturers, EPC contractors, government bodies, and commercial enterprises seeking assurance before delivery, installation, or use.

Inspection Scope for General Materials :

Generators & Power Systems

We verify mechanical, electrical, and safety performance:

• Engine block and alternator inspection
• Load testing & frequency stability
• Voltage regulation and harmonic distortion
• Cooling and lubrication systems
• Control panel functionality
• Fuel system integrity
• Noise and vibration levels
• Compliance with IEC, ISO, and manufacturer specifications

Our inspections guarantee reliable backup power performance.

HVAC Systems (Heating, Ventilation & Air Conditioning)

Inspection ensures operational efficiency and safety:

• AHU, chiller, VRF/VRV system inspection
• Cooling capacity testing
• Compressor and fan performance
• Refrigerant leak testing
• Airflow measurement and duct integrity
• Electrical load and control system checks
• Noise level & vibration assessment

A properly functioning HVAC system is vital for comfort, energy efficiency, and equipment longevity.

HVAC Systems (Heating, Ventilation & Air Conditioning)

Inspection ensures operational efficiency and safety:

• AHU, chiller, VRF/VRV system inspection
• Cooling capacity testing
• Compressor and fan performance
• Refrigerant leak testing
• Airflow measurement and duct integrity
• Electrical load and control system checks
• Noise level & vibration assessment

A properly functioning HVAC system is vital for comfort, energy efficiency, and equipment longevity.

Industrial Instruments & Control Devices

Proper calibration and reliable instrumentation ensure operational accuracy.
We inspect:

• Pressure, flow, temperature, and level instruments
• Gauges, sensors, transmitters
• PLCs and control modules
• Testing & calibration certificates
• Accuracy, repeatability, and response time

We guarantee measurement reliability for industrial and commercial operations.

Machinery & Mechanical Equipment

We examine assembly, performance, and
manufacturing accuracy for:

• Pumps, motors, compressors
• Industrial machines and production equipment
• Packaging and processing machines
• Cutting, welding, and fabrication machinery

Scope includes:

• Dimensional checks
• Performance testing
• Vibration analysis
• Alignment checks
• Safety systems evaluation
• Workmanship quality assessment

Tools, Hardware & Commercial Goods

From professional-grade tools to general equipment, we inspect:

• Hand tools & power tools
• Construction tools
• Hardware, fasteners & steel products
• Consumer goods & commercial equipment
• Packaging integrity and safety
• Mechanical performance & durability checks

This ensures products are safe, reliable, and correctly manufactured.

Documentation & Compliance Review

Across all categories, we review:

• Datasheets & technical drawings
• Operation & maintenance manuals
• Test certificates
• Calibration records
• Material certificates (MTC)
• Conformity documents (CE, ISO, IEC, ASTM, EN)
• Packing lists & labeling requirements

Documentation validation ensures that the product meets contractual and regulatory standards.

Functional Testing & Factory Acceptance (FAT)

Kaian Aldiqa performs or witnesses FAT for general materials:

• Load tests
• Safety device verification
• Operational checks
• Electrical & mechanical function tests
• Control panel and software testing
• Endurance and performance trials

Packing, Preservation & Shipment This reduces risk and ensures readiness prior to shipment.

Readiness Inspection

We check:

• Export packing quality
• Crating, palletizing, moisture protection
• Shock & vibration control
• Calibration records
• Labelling, marking & documentation
• Spare parts verification

Your goods must remain protected from factory to final delivery — and we ensure they are.

Why Choose Kaian Aldiqa for Technical Inspection of General Materials?

Sector-Specific Expert Inspectors:

Experienced technical inspectors covering industrial, electrical, mechanical, and commercial product categories.
Comprehensive Knowledge of International Standards:

IEC, ISO, EN, ASTM, ASME, CE, and more — ensuring your products meet global compliance.
High-Detail Technical Reports:

Clear, professional reports with photos, test values, deviations, and recommendations.
Trusted by Major Clients in Libya and International Markets:

Supporting oil & gas operators, importers, contractors, distributors, and government institutions.
Fast Scheduling & Global Coverage

Inspectors across Europe, Middle East, Asia, and Africa for rapid deployment.
Risk Reduction & Assurance

We ensure your purchased goods meet the exact expectations before delivery or installation.

Kaian Aldiqa ensures your industrial, electrical, and commercial materials are manufactured correctly, perform reliably, and comply fully with your requirements — before they ever reach your operations.

We turn technical complexity into clarity.